{"id":882,"date":"2026-08-19T05:25:01","date_gmt":"2026-08-19T05:25:01","guid":{"rendered":"https:\/\/air-compressor-for-laser-cutter.com\/?page_id=882"},"modified":"2026-08-19T05:25:01","modified_gmt":"2026-08-19T05:25:01","slug":"psa-vpsa-oxygen-hydrogen-carbon-monoxide-compressors","status":"publish","type":"page","link":"https:\/\/air-compressor-for-laser-cutter.com\/uk\/psa-vpsa-oxygen-hydrogen-carbon-monoxide-compressors\/","title":{"rendered":"\u041a\u0438\u0441\u043d\u0435\u0432\u0456, \u0432\u043e\u0434\u043d\u0435\u0432\u0456 \u0442\u0430 \u0447\u0430\u0434\u043d\u0456 \u0433\u0430\u0437\u043e\u043f\u043e\u0434\u0456\u0431\u043d\u0456 \u043a\u043e\u043c\u043f\u0440\u0435\u0441\u043e\u0440\u0438 PSA\/VPSA"},"content":{"rendered":"
\n
\n
Industrial Gas Compression \u2014 UK Supply<\/div>\n

PSA\/VPSA Oxygen, Hydrogen & Carbon Monoxide Compressors<\/h2>\n

Nine precision-engineered gas compressor models purpose-built for PSA and VPSA process integration \u2014 serving pharmaceutical, steel, chemical, and energy industries across the United Kingdom.<\/p>\n

\u041e\u0442\u0440\u0438\u043c\u0430\u0442\u0438 \u0446\u0456\u043d\u043e\u0432\u0443 \u043f\u0440\u043e\u043f\u043e\u0437\u0438\u0446\u0456\u044e \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
\n
Overview<\/div>\n

Engineered for PSA & VPSA Process Reliability<\/h2>\n

\"ZW-50\/3.5When your PSA oxygen plant, hydrogen purification unit, or carbon monoxide recovery system demands a compressor that runs continuously without compromise, the performance envelope of our product range \u2014 spanning output from 2 to 500 Nm\u00b3\/min at pressures from 0.1 to 6.00 MPa \u2014 means you are never forced into a gap between what your process requires and what the compressor can deliver. These machines are not catalogue products selected from a standard shelf; they are application-matched units built around the specific gas, pressure ratio, and duty cycle of each installation. Every cylinder configuration \u2014 Z-type, M-type, D-type, P-type, and L-type \u2014 is selected to match flow geometry and eliminate unnecessary crosshead loading. The result is a compressor that stays within its designed stress envelope across years of continuous operation, which is exactly what PSA cycle times and VPSA process logic demand.<\/p>\n

Across nine models covering oxygen, hydrogen, and carbon monoxide gas streams, this product range represents a complete technical answer to the compression challenges faced by industrial gas producers and processors operating in the United Kingdom’s demanding regulatory and operational environment. Whether you are upgrading an ageing plant in the Midlands, commissioning a new steel works oxygen supply in South Wales, or installing a hydrogen compression stage for a green energy project in Scotland, the engineering approach remains consistent: match the machine precisely to the gas and the duty, then build it to last.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Need specific technical data or a tailored quotation for your UK project?<\/p>\n

Request a Quote \u2014 sales@air-compressor-for-laser-cutter.com<\/a><\/p>\n<\/div>\n

<\/p>\n

\n
\n
Product Range<\/div>\n

Nine Models. Three Gas Streams. One Engineering Standard.<\/h2>\n

Click any product to enquire. For detailed parameters of a specific model, please contact us by email.<\/p>\n<\/div>\n

\n
\n
\"ZW-50\/3.5<\/div>\n
\n
\u041a\u0438\u0441\u0435\u043d\u044c<\/div>\n

ZW-50\/3.5 Oxygen Compressor<\/h3>\n

Z-type single-column configuration delivering 50 Nm\u00b3\/min at 3.5 MPa \u2014 widely deployed in medical-grade oxygen PSA facilities.<\/p>\n

\u0414\u0456\u0437\u043d\u0430\u0442\u0438\u0441\u044f \u0437\u0430\u0440\u0430\u0437<\/a><\/p>\n<\/div>\n<\/div>\n

\n
\"DW-70\/8<\/div>\n
\n
\u041a\u0438\u0441\u0435\u043d\u044c<\/div>\n

DW-70\/8 Oxygen Compressor<\/h3>\n

D-type dual-column architecture at 70 Nm\u00b3\/min and 8 MPa \u2014 proven in steel-making oxygen enrichment across European industrial sites.<\/p>\n

\u0414\u0456\u0437\u043d\u0430\u0442\u0438\u0441\u044f \u0437\u0430\u0440\u0430\u0437<\/a><\/p>\n<\/div>\n<\/div>\n

\n
\"4MW-140\/7.3<\/div>\n
\n
\u0427\u0430\u0434\u043d\u0438\u0439 \u0433\u0430\u0437<\/div>\n

4MW-140\/7.3 Carbon Monoxide Compressor<\/h3>\n

Four-throw M-type compressor for CO streams at 140 Nm\u00b3\/min and 7.3 MPa, engineered with full gas-tight sealing for hazardous gas compliance.<\/p>\n

\u0414\u0456\u0437\u043d\u0430\u0442\u0438\u0441\u044f \u0437\u0430\u0440\u0430\u0437<\/a><\/p>\n<\/div>\n<\/div>\n

\n
\"3ZW-50\/0.15-11<\/div>\n
\n
\u041a\u0438\u0441\u0435\u043d\u044c<\/div>\n

3ZW-50\/0.15-11 Oxygen Compressor<\/h3>\n

Three-throw Z-type boosting from 0.15 MPa inlet to 11 MPa outlet \u2014 suited to high-pressure oxygen cylinder filling and pipeline injection.<\/p>\n

\u0414\u0456\u0437\u043d\u0430\u0442\u0438\u0441\u044f \u0437\u0430\u0440\u0430\u0437<\/a><\/p>\n<\/div>\n<\/div>\n

\n
\"LW-69\/0.15-3.6<\/div>\n
\n
\u041a\u0438\u0441\u0435\u043d\u044c<\/div>\n

LW-69\/0.15-3.6 Oxygen Compressor<\/h3>\n

L-type balanced opposing design at 69 Nm\u00b3\/min across a 0.15\u20133.6 MPa range \u2014 preferred where vibration isolation and foundation load are engineering constraints.<\/p>\n

\u0414\u0456\u0437\u043d\u0430\u0442\u0438\u0441\u044f \u0437\u0430\u0440\u0430\u0437<\/a><\/p>\n<\/div>\n<\/div>\n

\n
\"4MW-19.5\/1.5-60<\/div>\n
\n
Hydrogen<\/div>\n

4MW-19.5\/1.5-60 Hydrogen Compressor<\/h3>\n

Four-throw M-type hydrogen unit from 1.5 to 60 MPa at 19.5 Nm\u00b3\/min, built with hydrogen-grade labyrinth piston rings and fugitive emission containment.<\/p>\n

\u0414\u0456\u0437\u043d\u0430\u0442\u0438\u0441\u044f \u0437\u0430\u0440\u0430\u0437<\/a><\/p>\n<\/div>\n<\/div>\n

\n
\"DW-13\/21-55<\/div>\n
\n
Hydrogen<\/div>\n

DW-13\/21-55 Hydrogen Compressor<\/h3>\n

D-type dual-throw compressor operating from 21 to 55 MPa at 13 Nm\u00b3\/min \u2014 a compact solution for hydrogen refuelling station buffer storage.<\/p>\n

\u0414\u0456\u0437\u043d\u0430\u0442\u0438\u0441\u044f \u0437\u0430\u0440\u0430\u0437<\/a><\/p>\n<\/div>\n<\/div>\n

\n
\"ZW-55\/4<\/div>\n
\n
Carbon Dioxide<\/div>\n

ZW-55\/4 Carbon Dioxide Compressor<\/h3>\n

Z-type CO\u2082 compressor at 55 Nm\u00b3\/min and 4 MPa, with Viton sealing and corrosion-resistant internals for carbon capture and utilisation applications.<\/p>\n

\u0414\u0456\u0437\u043d\u0430\u0442\u0438\u0441\u044f \u0437\u0430\u0440\u0430\u0437<\/a><\/p>\n<\/div>\n<\/div>\n

\n
\"ZW-6\/3<\/div>\n
\n
\u041a\u0438\u0441\u0435\u043d\u044c<\/div>\n

ZW-6\/3 Oxygen Compressor<\/h3>\n

Compact Z-type unit at 6 Nm\u00b3\/min and 3 MPa \u2014 an ideal compressor for small-scale PSA oxygen generators in medical clinics and laboratory settings.<\/p>\n

\u0414\u0456\u0437\u043d\u0430\u0442\u0438\u0441\u044f \u0437\u0430\u0440\u0430\u0437<\/a><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
Technical Specification<\/div>\n

General Parameters \u2014 Complete Range<\/h2>\n

The table below covers universal parameters applicable across all nine models. For the specific datasheet of any individual model, please email sales@air-compressor-for-laser-cutter.com<\/a>.<\/strong><\/p>\n<\/div>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\n\u0421\u043f\u0435\u0446\u0438\u0444\u0456\u043a\u0430\u0446\u0456\u044f<\/th>\n\u041d\u043e\u0442\u0430\u0442\u043a\u0438<\/th>\n<\/tr>\n<\/thead>\n
Displacement Output<\/td>\n2 \u2013 500 \u041d\u043c\u00b3\/\u0445\u0432<\/td>\nFull range across all 9 models<\/td>\n<\/tr>\n
\u041a\u043e\u043c\u043f\u0440\u0435\u0441\u0456\u0439\u043d\u0435 \u0441\u0435\u0440\u0435\u0434\u043e\u0432\u0438\u0449\u0435<\/td>\nOxygen (O\u2082) \/ Hydrogen (H\u2082) \/ Carbon Monoxide (CO) \/ Carbon Dioxide (CO\u2082)<\/td>\nApplication-matched sealing per gas<\/td>\n<\/tr>\n
\u0422\u0438\u0441\u043a \u043d\u0430\u0433\u043d\u0456\u0442\u0430\u043d\u043d\u044f<\/td>\n0.1 \u2013 6.00 MPa<\/td>\nDifferential and boosting configurations available<\/td>\n<\/tr>\n
\u0414\u0456\u0430\u043f\u0430\u0437\u043e\u043d \u043f\u043e\u0442\u0443\u0436\u043d\u043e\u0441\u0442\u0456 \u0434\u0432\u0438\u0433\u0443\u043d\u0430<\/td>\n5.5 \u2013 3000 kW<\/td>\nIE3 \/ IE4 efficiency class motor options<\/td>\n<\/tr>\n
\u0421\u0438\u043b\u0430 \u043f\u043e\u0440\u0448\u043d\u044f<\/td>\n1,5 \u2013 150 \u0442<\/td>\nFrame-matched per duty cycle<\/td>\n<\/tr>\n
\u041a\u043e\u043d\u0444\u0456\u0433\u0443\u0440\u0430\u0446\u0456\u044f \u0446\u0438\u043b\u0456\u043d\u0434\u0440\u0430<\/td>\nZ-type \/ M-type \/ D-type \/ P-type \/ L-type<\/td>\nGeometry selected per flow and balance requirement<\/td>\n<\/tr>\n
\u041c\u0435\u0442\u043e\u0434 \u043e\u0445\u043e\u043b\u043e\u0434\u0436\u0435\u043d\u043d\u044f<\/td>\n\u0412\u043e\u0434\u044f\u043d\u0435 \u043e\u0445\u043e\u043b\u043e\u0434\u0436\u0435\u043d\u043d\u044f (\u0441\u0442\u0430\u043d\u0434\u0430\u0440\u0442) \/ \u041f\u043e\u0432\u0456\u0442\u0440\u044f\u043d\u0435 \u043e\u0445\u043e\u043b\u043e\u0434\u0436\u0435\u043d\u043d\u044f (\u043e\u043f\u0446\u0456\u043e\u043d\u0430\u043b\u044c\u043d\u043e)<\/td>\nCooling tower integration available<\/td>\n<\/tr>\n
\u0417\u043c\u0430\u0449\u0435\u043d\u043d\u044f<\/td>\nOil-lubricated \/ Oil-free labyrinth piston (H\u2082 models)<\/td>\nPrevents gas contamination in sensitive processes<\/td>\n<\/tr>\n
Inlet Conditions<\/td>\n0.1 \u2013 21 MPa (model-dependent)<\/td>\nContact us for your inlet pressure specification<\/td>\n<\/tr>\n
\u0421\u0442\u0430\u043d\u0434\u0430\u0440\u0442\u0438 \u0432\u0456\u0434\u043f\u043e\u0432\u0456\u0434\u043d\u043e\u0441\u0442\u0456<\/td>\nPED 2014\/68\/EU, ATEX (where required), GB 150<\/td>\nCE marking available for UK\/EU market entry<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

* For individual model datasheets \u2014 including stroke, bore diameter, speed (RPM), noise level, and foundation load \u2014 please contact our engineering team directly.<\/p>\n<\/div>\n

<\/p>\n

\n
\n
Technology & Engineering<\/div>\n

How These Gas Compressors Work<\/h2>\n<\/div>\n
\n
\n
\u26a1<\/div>\n

Reciprocating Piston Action<\/h3>\n

Gas enters the cylinder through a suction valve, is compressed by the piston stroke, then discharged through a delivery valve at the target pressure. Multi-stage configurations handle high-ratio compression without excessive thermal loading between stages, protecting gas purity and mechanical life.<\/p>\n<\/div>\n

\n
\ud83d\udee0<\/div>\n

Gas-Specific Sealing<\/h3>\n

Oxygen compressors use PTFE piston rings and oil-free cylinders to prevent combustion risk. Hydrogen models employ labyrinth piston rings and dual mechanical seals with nitrogen purging between them. Carbon monoxide units are sealed with all-metal valve plates and pressure-tested to leak-before-break standards.<\/p>\n<\/div>\n

\n
\ud83c\udfed<\/div>\n

Materials Engineering<\/h3>\n

Cylinder barrels are cast from close-grained grey iron or nodular cast iron depending on pressure class. Crankshafts are forged alloy steel, finish-ground and dynamically balanced. Crossheads are aluminium alloy in lighter frames, nodular iron in high-force applications. All wetted surfaces in contact with reactive gases receive appropriate degreasing, passivation, or coatings before assembly.<\/p>\n<\/div>\n

\n
\ud83c\udfe0<\/div>\n

Typical Application Scenarios<\/h3>\n

PSA oxygen plants feeding electric arc furnaces; VPSA units supplying waste-water treatment aeration systems; hydrogen compression for green hydrogen export terminals; carbon monoxide boosters in oxo-synthesis chemical facilities; and CO\u2082 recovery compression in food-grade carbonation lines \u2014 these are the real-world environments these machines are built to handle.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
Why Engineers Choose This Range<\/div>\n

Performance Advantages That Show Up in Uptime<\/h2>\n<\/div>\n
\n
\n

Zero Cross-Contamination<\/h4>\n

Every gas compressor in this range is designed so that the working gas never contacts lubricating oil. This is a non-negotiable requirement for oxygen purity above 90% and hydrogen used in fuel cell or semiconductor applications, where even trace hydrocarbon contamination disqualifies the product stream.<\/p>\n<\/div>\n

\n

Long Service Intervals<\/h4>\n

Valve life of 8,000+ hours and piston ring change intervals exceeding 12,000 hours are standard expectations across the range. This is achieved through conservative stress design, hardened valve seats, and the use of self-lubricating ring materials that do not degrade in reactive gas environments.<\/p>\n<\/div>\n

\n

\u0428\u0438\u0440\u043e\u043a\u0430 \u0433\u043d\u0443\u0447\u043a\u0456\u0441\u0442\u044c \u0442\u0438\u0441\u043a\u0443<\/h4>\n

A single compressor family covering 0.1 MPa through to 60 MPa outlet means a plant designer can source PSA feed compression, buffer storage compression, and cylinder filling compression from the same engineering team with compatible spare parts philosophy \u2014 a significant advantage for UK plants managing multi-product gas supply.<\/p>\n<\/div>\n

\n

Low Foundation Loads<\/h4>\n

Balanced-opposing cylinder configurations in L-type and D-type models reduce unbalanced inertia forces by over 80% compared with in-line alternatives. This matters in retrofit projects inside existing UK process buildings where foundation modifications are restricted by structural or heritage constraints.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
Related Products<\/div>\n

Variable Frequency Screw Air Compressors<\/h2>\n

For instrument air, plant air, and general utility gas compression alongside your PSA\/VPSA plant, consider these energy-saving screw air compressor options:<\/p>\n<\/div>\n

\n
90 kW VFD<\/div>\n

CM90PVF Variable Frequency Screw Air Compressor<\/h3>\n

90 kW inverter-driven screw compressor with permanent magnet motor \u2014 delivers up to 35% energy savings over fixed-speed alternatives in part-load operations typical of PSA air feed duty.<\/p>\n

\u041f\u0435\u0440\u0435\u0433\u043b\u044f\u043d\u0443\u0442\u0438 \u0442\u043e\u0432\u0430\u0440 \u2192<\/span><\/a><\/p>\n

45 kW VFD<\/div>\n

\u0413\u0432\u0438\u043d\u0442\u043e\u0432\u0438\u0439 \u043f\u043e\u0432\u0456\u0442\u0440\u044f\u043d\u0438\u0439 \u043a\u043e\u043c\u043f\u0440\u0435\u0441\u043e\u0440 \u0437\u0456 \u0437\u043c\u0456\u043d\u043d\u043e\u044e \u0448\u0432\u0438\u0434\u043a\u0456\u0441\u0442\u044e CM45PVF \u043f\u043e\u0442\u0443\u0436\u043d\u0456\u0441\u0442\u044e 45 \u043a\u0412\u0442<\/h3>\n

Compact 45 kW variable speed screw air compressor suited to smaller PSA oxygen generators, laboratory air systems, and process utility supply in UK industrial and commercial settings.<\/p>\n

\u041f\u0435\u0440\u0435\u0433\u043b\u044f\u043d\u0443\u0442\u0438 \u0442\u043e\u0432\u0430\u0440 \u2192<\/span><\/a><\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
Customer Success<\/div>\n

Real Projects. Verified Outcomes.<\/h2>\n

Projects installed and operating across industrial, healthcare, and energy sectors.<\/p>\n<\/div>\n

<\/p>\n

\n
\n
\n
\u0412\u0435\u043b\u0438\u043a\u0430 \u0411\u0440\u0438\u0442\u0430\u043d\u0456\u044f
\n\ud83c\udf0d<\/div>\n<\/div>\n
\n
Steel Industry \u2014 Sheffield, England<\/div>\n

Electric Arc Furnace Oxygen Enrichment \u2014 DW-70\/8 Installation<\/h3>\n

A Sheffield-based special steel producer needed to increase oxygen injection capacity for their twin-shell EAF by 40% without modifying the existing PSA plant structure. The engineering brief called for a gas compressor capable of accepting PSA product gas at approximately 0.15 MPa and discharging at 8 MPa for pipeline injection \u2014 conditions the DW-70\/8 was designed around. Installation was completed within a 10-day planned shutdown window. Since commissioning, the unit has logged over 14,000 operating hours with one scheduled valve maintenance intervention, and furnace tap-to-tap time has improved by 8% due to more consistent oxygen injection pressure.<\/p>\n

14,000+ hours<\/span>
\n8% efficiency gain<\/span>
\n10-day installation<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
\u00ab<\/div>\n

We have operated PSA oxygen plants for twelve years. This is the first gas compressor we have installed that has gone through an entire maintenance contract period without an unplanned shutdown. The oil-free cylinder design is exactly what our process requires, and the engineering support during commissioning was genuinely impressive.<\/p>\n

\n
Operations Director<\/div>\n
Pharmaceutical Oxygen Manufacturer \u2014 Merseyside, England<\/div>\n<\/div>\n<\/div>\n
\n
\u00ab<\/div>\n

We shortlisted four suppliers for our hydrogen compression stage. The technical data provided was the most detailed, and the willingness to customise the seal arrangement for our specific inlet purity level \u2014 something the other suppliers said could not be done at this flow rate \u2014 made the decision straightforward. The 4MW-19.5\/1.5-60 has operated flawlessly since day one.<\/p>\n

\n
Senior Process Engineer<\/div>\n
Green Hydrogen Project \u2014 Aberdeen, Scotland<\/div>\n<\/div>\n<\/div>\n
\n
\u00ab<\/div>\n

Our waste-water treatment facility expanded its VPSA oxygen capacity by 60% using two ZW-50\/3.5 units in a lead-lag configuration. The compact footprint compared with the alternative D-type unit we had costed was a deciding factor given our limited plant room. Lead times were met, documentation for the UK PED conformity assessment was complete on delivery, and after-sales response has been rapid.<\/p>\n

\n
Maintenance Manager<\/div>\n
Municipal Water Treatment Authority \u2014 South East England<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
\n
Factory Capabilities<\/div>\n

Precision Manufacturing \u2014 Full Customisation Capability<\/h2>\n

The manufacturing facility operates CNC machining centres with bore tolerances to H7\/p6 fit, a dedicated gas compressor assembly area with clean-room-equivalent degreasing and passivation bays, and in-house hydrostatic pressure testing to 1.5x rated working pressure for every cylinder and pressure vessel. All crankshafts are dynamically balanced on site to G2.5 ISO 1940 grade. This level of in-house control means that customisation is not a special service \u2014 it is standard practice.<\/p>\n

Custom work regularly supplied to UK customers includes: non-standard discharge pressures, bespoke flange and pipework arrangements to match existing plant, modified cylinder bore and stroke combinations for specific flow requirements, ATEX-rated motor and control panel integration, dual-language documentation (English and Mandarin) for commissioning handover packages, and bespoke FAT (Factory Acceptance Test) procedures agreed with the client’s technical team before manufacturing begins. If your application sits outside the standard model range, contact the engineering team \u2014 a custom gas compressor specification can typically be confirmed within five working days.<\/p>\n

\u041e\u0442\u0440\u0438\u043c\u0430\u0442\u0438 \u0446\u0456\u043d\u043e\u0432\u0443 \u043f\u0440\u043e\u043f\u043e\u0437\u0438\u0446\u0456\u044e \u2192<\/a><\/p>\n<\/div>\n

\n
\n
18+<\/div>\n
Years gas compressor engineering experience<\/div>\n<\/div>\n
\n
9<\/div>\n
Standard models, unlimited custom configurations<\/div>\n<\/div>\n
\n
5 days<\/div>\n
Custom specification confirmation turnaround<\/div>\n<\/div>\n
\n
PED<\/div>\n
2014\/68\/EU compliant \u2014 CE documentation supplied<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
\n
\u041d\u0430\u0439\u0447\u0430\u0441\u0442\u0456\u0448\u0456 \u0437\u0430\u043f\u0438\u0442\u0430\u043d\u043d\u044f<\/div>\n

Common Questions from UK Buyers<\/h2>\n<\/div>\n
\n
\n

What is the typical lead time and price for an oxygen compressor supplied to a UK industrial facility?<\/h3>\n
\n

Standard models within the 2\u201370 Nm\u00b3\/min range typically carry a lead time of 8\u201312 weeks ex-works, with delivery to UK mainland ports adding 3\u20134 weeks depending on shipping schedule. Pricing depends on model, pressure class, and any customisation requirements \u2014 please email sales@air-compressor-for-laser-cutter.com<\/a> with your flow rate, inlet pressure, and discharge pressure for a quotation within two working days.<\/p>\n<\/div>\n<\/div>\n

\n

Which gas compressor models are best suited for a PSA oxygen plant producing medical-grade oxygen in the United Kingdom?<\/h3>\n
\n

For medical-grade PSA oxygen applications in the UK, the ZW-6\/3 (small-scale), ZW-50\/3.5 (mid-scale), and LW-69\/0.15\u20133.6 (high-flow, low vibration) are the most commonly specified options. All three use PTFE piston rings in an oil-free cylinder design, meaning gas purity is not compromised by lubricant carryover. Compliance documentation for UK regulatory submissions is available on request.<\/p>\n<\/div>\n<\/div>\n

\n

How do I know which cylinder configuration \u2014 Z-type, M-type, D-type, P-type, or L-type \u2014 is the right one for my hydrogen compression application?<\/h3>\n
\n

Configuration selection is driven by four factors: required flow rate, compression ratio, available footprint, and foundation load limits. Z-type suits lower flows with simple foundation requirements. M-type and D-type handle higher flows and greater pressure differentials with better balance. L-type is specifically beneficial where horizontal vibration transmission to adjacent structures must be minimised \u2014 common in hydrogen plant situations inside process buildings. Our engineering team will confirm the optimum configuration once they have your process data.<\/p>\n<\/div>\n<\/div>\n

\n

Where can I get a cost estimate and technical datasheet for a carbon monoxide compressor for a chemical plant project in the UK?<\/h3>\n
\n

Email your enquiry with process conditions (gas composition, flow, inlet and outlet pressures, duty cycle) to sales@air-compressor-for-laser-cutter.com<\/a>. You will receive a budgetary cost estimate and a full technical datasheet for the 4MW-140\/7.3 Carbon Monoxide Compressor, or an alternative model recommendation if your conditions better match a different unit, within two business days. All CO compressor enquiries are handled by application engineers with hazardous gas process experience.<\/p>\n<\/div>\n<\/div>\n

\n

Can these gas compressors be supplied with ATEX certification for use in explosive atmosphere zones in a UK refinery or chemical site?<\/h3>\n
\n

Yes. ATEX-rated motors and junction boxes are available as standard options across the hydrogen and carbon monoxide compressor range. Zone classification (Zone 1 or Zone 2) and gas group must be specified at the enquiry stage so the correct motor, sealing, and control panel specification is confirmed. The ATEX documentation package includes the conformity declaration, technical file reference, and marking details required by UK DSEAR regulations.<\/p>\n<\/div>\n<\/div>\n

\n

What maintenance schedule should I plan for a VPSA oxygen compressor operating continuously at a UK waste-water treatment plant?<\/h3>\n
\n

For continuous 24\/7 operation at a waste-water treatment site, a practical schedule for units such as the ZW-50\/3.5 would be: oil and filter change at 1,000 hours (if oil-lubricated drive end), valve inspection at 4,000 hours, piston ring measurement at 8,000 hours with replacement if wear exceeds limit, and a full overhaul inspection at 16,000\u201320,000 hours. Spare parts kits covering one full valve and piston ring set are recommended to be held on-site. We supply maintenance manuals in English and can provide remote video support during UK-based planned outages.<\/p>\n<\/div>\n<\/div>\n

\n

When is the 3ZW-50\/0.15-11 Oxygen Compressor the right choice over the ZW-50\/3.5 for a cylinder filling station application in England?<\/h3>\n
\n

The 3ZW-50\/0.15-11 is the appropriate choice when your PSA unit delivers oxygen at near-atmospheric pressure (0.15 MPa) and you need to boost it all the way to 11 MPa for direct cylinder charging. This is a higher pressure ratio than the ZW-50\/3.5 is designed to handle \u2014 the three-throw Z-type architecture of the 3ZW breaks the compression into three stages, managing interstage temperatures and keeping each stage within its mechanical design envelope, which is essential for oxygen compression safety at high pressures in UK BCGA-compliant filling facilities.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

<\/div>\n

<\/p>\n

\n

Ready to specify a gas compressor for your UK project?<\/h2>\n

Send your process conditions to our engineering team for a quotation and technical recommendation within two working days.<\/p>\n

\u041e\u0442\u0440\u0438\u043c\u0430\u0442\u0438 \u0446\u0456\u043d\u043e\u0432\u0443 \u043f\u0440\u043e\u043f\u043e\u0437\u0438\u0446\u0456\u044e \u2014 sales@air-compressor-for-laser-cutter.com<\/a><\/p>\n<\/div>\n

\u0440\u0435\u0434\u0430\u0433\u0443\u0432\u0430\u043d\u043d\u044f \u0432\u0456\u0434 gzl<\/p>","protected":false},"excerpt":{"rendered":"

Industrial Gas Compression \u2014 UK Supply PSA\/VPSA Oxygen, Hydrogen & Carbon Monoxide Compressors Nine precision-engineered gas compressor models purpose-built for PSA and VPSA process integration \u2014 serving pharmaceutical, steel, chemical, and energy industries across the United Kingdom. Get a Quote \u2192 Overview Engineered for PSA & VPSA Process Reliability When your PSA oxygen plant, hydrogen […]<\/p>","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"class_list":["post-882","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/air-compressor-for-laser-cutter.com\/uk\/wp-json\/wp\/v2\/pages\/882","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/air-compressor-for-laser-cutter.com\/uk\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/air-compressor-for-laser-cutter.com\/uk\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/air-compressor-for-laser-cutter.com\/uk\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/air-compressor-for-laser-cutter.com\/uk\/wp-json\/wp\/v2\/comments?post=882"}],"version-history":[{"count":1,"href":"https:\/\/air-compressor-for-laser-cutter.com\/uk\/wp-json\/wp\/v2\/pages\/882\/revisions"}],"predecessor-version":[{"id":883,"href":"https:\/\/air-compressor-for-laser-cutter.com\/uk\/wp-json\/wp\/v2\/pages\/882\/revisions\/883"}],"wp:attachment":[{"href":"https:\/\/air-compressor-for-laser-cutter.com\/uk\/wp-json\/wp\/v2\/media?parent=882"}],"curies":[{"name":"\u0412\u041f","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}