Опис
The CM110PVF permanent magnet variable frequency screw air compressor is engineered for demanding industrial environments across the United Kingdom where consistent, energy-efficient compressed air is a daily operational necessity. Rated at 110 kW (150 HP) with a free air delivery spanning 6.04 to 19.40 m³/min depending on working pressure, this machine delivers precisely the air volume your process demands — no more, no less. The variable frequency drive continuously matches motor speed to actual demand, eliminating the destructive load/unload cycling that shortens compressor life and wastes electricity. With an acoustic footprint of just 78 dB(A), the CM110PVF operates quietly enough for workshops situated close to staff areas, supporting compliance with UK workplace noise regulations. Whether you run a food processing line in Yorkshire, an automotive assembly plant in the West Midlands, or a precision engineering workshop in the East Midlands, this compressor delivers the reliability and efficiency your operation depends on.
CM110PVF Technical Parameter Chart — Available in multiple pressure and flow configurations
Why UK Manufacturers Choose the CM110PVF
Up to 38% Energy Savings
The integrated permanent magnet motor paired with the variable frequency drive reduces energy consumption by up to 38% compared with fixed-speed alternatives. In the UK industrial sector where electricity costs have surged in recent years, this translates directly into measurable reductions on monthly utility bills — payback periods of under three years are commonly achieved by our British customers operating two-shift patterns.
Class-Leading Quiet Operation
At only 78 dB(A), the CM110PVF runs noticeably quieter than conventional screw compressors in its power class. The noise-dampened enclosure uses multi-layer acoustic panels and anti-vibration mounts to keep mechanical sound contained within the unit. This makes installation practical in semi-open production environments and in shared industrial units where neighbour considerations matter — a common requirement in UK light-industrial estates.
Smart Inverter Controller
The intelligent touchscreen controller monitors inlet temperature, outlet pressure, and motor load in real time. Fault codes, maintenance reminders, and operating trend logs are stored on-unit and can be exported for planned maintenance scheduling. Remote monitoring compatibility means UK maintenance teams can check compressor health without entering the plant floor, supporting modern Industry 4.0 workflows.
Robust, Low-Maintenance Build
The oil-injected rotary screw element is manufactured with premium-grade alloy steel rotors, precision ground to micron tolerances. The PM motor uses rare-earth magnets embedded directly in the rotor, eliminating brush wear entirely. Combined with the 8,000-hour oil change interval and easy-access service panels, the CM110PVF keeps planned downtime minimal — a critical factor for UK production sites running continuous or near-continuous shifts.
Wide Pressure Range Flexibility
With three selectable working pressures — 0.8 MPa (116 psi), 1.0 MPa (145 psi), and 1.25 MPa (181 psi) — the CM110PVF adapts to the specific system requirements of your plant. Laser cutting, pneumatic conveying, injection moulding, and spray finishing all demand different pressure and flow characteristics, and the CM110PVF covers them all without requiring separate units.
CE Marked & UK Regulation Ready
The CM110PVF meets CE marking requirements and is compatible with UKCA conformity assessment criteria applicable to pressure equipment supplied in England, Scotland, and Wales. All units ship with full documentation packs including declaration of conformity, wiring diagrams, and bilingual operating manuals to satisfy HSE on-site requirements.
How the CM110PVF Permanent Magnet VFD System Works
At the heart of the CM110PVF lies a direct-drive permanent magnet synchronous motor — a fundamentally different design from the induction motors found in conventional screw compressors. Rare-earth neodymium magnets embedded in the rotor create a constant magnetic field that reacts instantaneously with the stator’s rotating field, producing torque without any slip losses. The result is motor efficiency that stays above 96% across the entire operating speed range, not just at full load.
The variable frequency drive (VFD) regulates the electrical supply frequency delivered to the motor, which directly controls rotational speed. When your downstream demand drops — during a shift break, between production cycles, or overnight — the VFD slows the motor precisely to match. Air delivery is continuously and smoothly matched to system demand, eliminating the pressure fluctuations and energy spikes associated with start/stop or load/unload control strategies. Pressure is held within ±0.1 bar of the setpoint, delivering stable air quality to sensitive pneumatic tools and instrumentation.
The screw element itself uses asymmetric helical rotor profiles machined to Class 5 tolerance. Oil injection into the compression chamber serves three functions simultaneously: it seals the rotor clearances to maintain volumetric efficiency, it lubricates the rotors to prevent metal-to-metal contact, and it absorbs the heat of compression to keep discharge temperatures low — typically 75–85°C above ambient. This thermally stable compression cycle is a key reason why the CM110PVF achieves over 40,000 operating hours between major overhauls under normal UK industrial conditions.
Industries & Applications Across the UK
Laser Cutting & CNC
Stable 1.0 MPa supply sustains assist gas pressure for fibre laser cutting at high feed rates without pressure drop mid-cut.
Food & Beverage Processing
Low noise and oil-managed output support air quality standards for pneumatic conveyors and packaging lines in food-grade environments.
Automotive Manufacturing
High-volume FAD at 0.8 MPa supports air tools, paint booths, and robotic actuators across assembly shift patterns.
Precision Engineering
Consistent 1.25 MPa output for high-cycle pneumatic clamping, gauging, and actuator-heavy machining cells.
Construction & Infrastructure
Robust build quality handles dusty construction environments; variable output matches shifting demand from large pneumatic tool fleets.
Pharmaceutical & Chemical
Reliable, steady-state pressure maintenance supports reactor pressurisation, filter press operation, and pneumatic transfer systems.
CM110PVF Technical Specifications
| Model | Working Pressure (MPa) | Working Pressure (Psi) | FAD (m3/min) | FAD (cfm) | Power (kW) | Power (HP) | Noise dB(A) | Weight (Kg) | Dimensions L×W×H (mm) |
|---|---|---|---|---|---|---|---|---|---|
| CM110PVF | 0.8 | 116 | 7.76 – 19.40 | 274 – 685 | 110 | 150 | 78 | 4000 | 3750×1850×2180 |
| 1.0 | 145 | 6.76 – 16.90 | 239 – 597 | 2270 | 2500×1400×1580 | ||||
| 1.25 | 181 | 6.04 – 15.10 | 213 – 533 | 2270 | 2500×1400×1580 |
Ever Power Factory & Custom Engineering Capability
Ever Power operates a dedicated manufacturing complex with over 35,000 m² of production space and more than 200 CNC machining centres. Our in-house rotor grinding lines produce screw elements to Class 5 tolerance without outsourcing, giving us direct quality control over the most performance-critical component in every compressor we ship.
Our product customisation service is a genuine differentiator for UK industrial buyers who cannot find an off-the-shelf solution that fits their process requirements. We routinely develop custom configurations including non-standard pressure settings outside the catalogue range, special voltage ratings for 400V/50Hz UK grid compatibility, extended enclosures for outdoor or weatherproof installation, custom control interface integrations for SCADA and BMS systems, and bespoke colour finishes for OEM partners and branded machinery builders. Our engineering team can work from customer-supplied P&ID drawings, site survey data, or purely from a verbal brief — we will ask the right questions and come back with a proposal that actually fits.
Lead times for standard CM110PVF units supplied to UK addresses are typically 4–6 weeks. Custom-configured units are quoted individually, with most projects achievable within 8–10 weeks from order confirmation. We hold spare parts inventory and can support planned maintenance programmes directly from factory stock.
Customer Success: Real UK & International Installations
🇬🇧 West Midlands Automotive Tier-1 Supplier — UK
A stamping and assembly sub-supplier based in Coventry was running three aging fixed-speed compressors to support a 24/5 production schedule. Annual electricity spend on compressed air alone exceeded £68,000. After installing two CM110PVF units in a duty-standby arrangement operating at 1.0 MPa, the site achieved a 34% reduction in compressed air energy consumption, cutting the annual bill by approximately £23,000. The low noise level also allowed the compressor room to be integrated closer to the production hall, saving approximately £12,000 in pipework infrastructure. The project paid for itself in under 30 months.
“The variable frequency control is noticeably smoother than anything we had before. Pressure holds rock-steady across all shifts, and the service team are responsive when we need them.” — Maintenance Manager, Coventry
🇩🇪 Precision Sheet Metal Fabricator — Germany
A laser cutting and bending specialist in Stuttgart operating three 6 kW fibre laser cutters was experiencing inconsistent assist air pressure when all machines ran simultaneously. The existing compressor delivered insufficient peak FAD during concurrent cutting cycles. A single CM110PVF at 1.25 MPa replaced two older units and provided a 20% headroom in FAD above peak demand. Cut quality on aluminium and stainless steel improved measurably, and the site now runs a fourth laser cutter that previously could not be operated during busy periods due to air capacity constraints.
“We tested three compressor brands. The Ever Power unit was the only one that held pressure without a single dropout across a four-hour simultaneous cutting test. That settled the decision for us.” — Operations Director, Stuttgart
🇬🇧 Food Packaging Manufacturer — Yorkshire, UK
A mid-sized food packaging operation in Leeds required a replacement compressor following catastrophic failure of their incumbent unit during peak production season. The CM110PVF was selected partly on technical grounds and partly because Ever Power could deliver and commission a unit within five weeks of order — faster than any alternative supplier. The 0.8 MPa configuration with 19.40 m³/min maximum FAD comfortably supports the site’s four bag-sealing lines and pneumatic conveyor network. Eighteen months on, the unit has accumulated over 11,200 operating hours with no unplanned downtime.
“The delivery speed was critical for us — we had lines standing idle. The compressor arrived, was commissioned in two days, and has not missed a beat since.” — Engineering Manager, Leeds
Часті запитання
What is the best permanent magnet variable frequency screw повітряний компресор for laser cutting operations in the UK?
For UK laser cutting applications, the CM110PVF operating at 1.0 MPa or 1.25 MPa is widely regarded as one of the most capable choices in the 110 kW power class. Its VFD control ensures consistent assist gas pressure during multi-head simultaneous cutting, and its high maximum FAD (up to 597 cfm at 1.0 MPa) supports even the most demanding multi-machine workshops.
How much does a 110 kW variable frequency drive screw compressor cost from a UK supplier and what is the price range?
Pricing for the CM110PVF varies depending on pressure configuration, options, and delivery location within the UK. To get an accurate price or competitive quote, we recommend emailing our sales team directly at [email protected] with your site address, required pressure, and estimated daily operating hours. We typically respond within one working day with a detailed proposal.
Where can I find a reliable industrial air compressor supplier in England for manufacturing facilities that need high-volume compressed air?
Ever Power supplies the CM110PVF and other industrial screw compressors to manufacturing facilities throughout England, Scotland, and Wales. We ship directly from factory to site with commissioned delivery options available. Our UK-based after-sales contacts can coordinate scheduled maintenance and emergency spare parts dispatch.
How does a permanent magnet VFD compressor save energy compared with a fixed-speed screw compressor when used in UK automotive plants?
A permanent magnet VFD compressor like the CM110PVF continuously adjusts motor speed to match actual air demand rather than running at full speed and wasting energy during low-demand periods. In automotive plants with variable shift patterns and mixed pneumatic tool usage, this typically delivers 25–38% energy savings compared with a fixed-speed equivalent. The PM motor’s efficiency advantage over induction motors adds a further 3–5% reduction in specific energy consumption across the operating range.
Which air compressor model should a West Midlands precision engineering company choose when they need 145 psi and more than 500 cfm flow?
For West Midlands precision engineering sites requiring 145 psi (1.0 MPa) with peak demands up to approximately 597 cfm, the CM110PVF configured for 1.0 MPa operation is the direct fit. It delivers 239–597 cfm of free air at 145 psi and runs at 78 dB(A), which is well within typical industrial estate noise limits. Contact us with your daily runtime profile for a payback calculation specific to your site.
When is the right time to upgrade from a fixed-speed compressor to a variable frequency screw compressor for a UK food processing facility?
The right time to upgrade is usually when your fixed-speed unit is more than 10 years old, when energy bills are rising faster than production output, or when your compressed air demand profile has become more variable due to production changes. UK food processing facilities with seasonal demand peaks particularly benefit from VFD control, as the compressor automatically scales back during slower production periods. If your annual compressed air electricity cost exceeds £30,000, an upgrade to CM110PVF will almost certainly deliver a positive ROI within three years.
Ready to Power Your UK Operation with the CM110PVF?
Contact our technical sales team for a custom quote, site survey, or energy saving analysis. We serve manufacturing, engineering, and processing facilities across England, Scotland, and Wales.
редагування від gzl
