CM55PVF Permanent Magnet Variable Frequency Air Compressor

Why UK Engineers Choose the CM55PVF

The CM55PVF is a 55kW permanent magnet variable frequency rotary screw air compressor that redefines what industrial buyers in the United Kingdom expect from compressed air systems. Whether you operate a busy fabrication shop in Birmingham, a packaging line in Manchester, or a food-grade facility in Leeds, the CM55PVF delivers consistent pressure between 0.8 MPa and 1.25 MPa with a free air delivery range of 2.97 to 9.60 m³/min — adapting in real time to the actual demand of your production floor. The integrated variable frequency drive (VFD) continuously modulates motor speed, eliminating the wasteful load/unload cycling that drains energy budgets in traditional fixed-speed machines. In independent testing, users switching from conventional screw compressors recorded energy cost reductions of 25–35%, which translates directly into measurable savings on quarterly electricity bills — a critical factor for UK operators facing rising energy tariffs.

Unlike compressors that sacrifice longevity for efficiency, the CM55PVF pairs its permanent magnet motor — rated at IP65 and maintenance-free by design — with a precision-engineered screw element, heavy-duty cast iron housing, and a multi-stage oil separation system delivering outlet oil content below 3 ppm. Operating at just 70 dB(A), it qualifies for near-operator placement without costly acoustic enclosures, reducing installation complexity and footprint on the workshop floor.

Permanent Magnet Motor

The high-efficiency IE4-class permanent magnet motor is directly coupled to the airend without a gearbox or belt, eliminating mechanical transmission losses. The IP65-rated enclosure makes it suitable for dusty or humid environments found across UK industrial parks and food processing sites. With zero excitation current losses, the PM motor maintains peak efficiency even at part-load operation — the scenario where most compressors waste the most energy.

Variable Frequency Drive (VFD)

The integrated VFD samples discharge pressure 100 times per second and adjusts motor speed accordingly, keeping output pressure within ±0.1 bar of your set point. This closed-loop control eliminates pressure overshoot, protects downstream tooling from pressure spikes, and removes the energy penalty of the traditional load/unload cycle entirely. During low-demand periods — overnight shifts, weekends — the motor idles smoothly rather than cycling on and off, reducing wear and extending service intervals.

Multi-Stage Oil Separation

Compressed air passes through a two-stage cyclonic separator followed by a high-efficiency coalescing filter element, reducing residual oil content to below 3 ppm. This output quality comfortably meets ISO 8573-1 Class 3 for oil aerosol — suitable as a pre-treatment stage for many food and pharmaceutical applications across England, Scotland, and Wales. The oil system uses a long-life synthetic lubricant with 4,000-hour change intervals, cutting maintenance downtime substantially compared to standard mineral oil compressors.

Intelligent Controller

The colour touchscreen controller displays real-time data on pressure, temperature, running hours, energy consumption, and fault codes with historical logging. Scheduled start/stop functionality, RS485 Modbus communication, and optional remote monitoring via LAN make the CM55PVF ready for integration into Industry 4.0 environments. UK buyers operating multi-compressor systems can link up to 8 units for master-slave sequencing, maximising system efficiency across the entire compressed air network.

Manufacturing & Engineering

CNC machining centres, plasma cutting, shot blasting, and pneumatic assembly lines throughout the UK Midlands and North West.

Yiyecek ve İçecek

Low oil content output supports packaging, conveying, and bottling lines where air quality is governed by strict BRCGS and FSA requirements.

Otomotiv

Bodyshop spray painting, tyre inflation, and air tools in dealerships and bodyshops requiring stable pressure without fluctuation.

Pharmaceuticals

Process air for tablet coating, blister packaging, and laboratory equipment — paired with downstream drying for GMP compliance.

Print & Packaging

Reliable airflow for large-format digital presses, die-cutting machines, and automated folding/gluing lines with variable-speed demand.

Construction & Utilities

Site-based compressors for concrete breaking, pipe testing, and utility contractor fleets operating across England and Wales.

Class-Leading Energy Efficiency

The combination of PM motor and VFD achieves a specific power consumption of ≤6.8 kW/(m³/min), comfortably surpassing IE3 fixed-speed equivalents. For a UK plant running two shifts daily, this can represent £8,000–£14,000 per year in electricity savings at current tariff rates — payback periods of under 2 years are typical.

Near-Silent Operation

At 70 dB(A), the CM55PVF is roughly as loud as a normal conversation. This matters enormously in UK workplaces where the Control of Noise at Work Regulations 2005 require action when daily exposure reaches 80 dB(A). Operators can legally place this machine in the same room as staff without triggering mandatory hearing protection zones or costly acoustic housings.

Reduced Maintenance Burden

Direct-drive eliminates belts, couplings, and gearbox oil — the three most common maintenance failure points on legacy compressors. Synthetic oil change intervals of 4,000 hours and an air filter service interval of 2,000 hours mean a typical UK factory needs just two scheduled maintenance visits per year, keeping your maintenance contractor’s invoice manageable throughout the product lifecycle.

Smart Monitoring & Industry 4.0 Ready

The intelligent controller logs every key parameter, enabling plant engineers to analyse consumption trends, spot anomalies early, and plan maintenance proactively rather than reactively. Modbus RS485 and optional LAN integration connect seamlessly to SCADA systems and building management platforms already deployed in modern UK manufacturing sites.

Built to Your Specification — Custom Compressor Solutions

Ever Power’s manufacturing facility occupies over 28,000 m² and is certified to ISO 9001:2015 and CE standards. Our in-house engineering team has delivered bespoke compressed air systems to customers across Europe, the Middle East, and Southeast Asia, and we regularly partner with UK importers, distributors, and end users who need something beyond the standard catalogue. Whether you require a non-standard voltage configuration for UK 3-phase supplies, a modified pressure range, custom colour coding to match site safety schemes, or full system integration with vessel, dryer, and filtration skid — we can engineer it.

Our dedicated OEM team manages the full project cycle: needs analysis, engineering drawing approval, prototype production, witness testing, and documentation in English including CE Declaration of Conformity. Lead times for standard units are 15–25 days ex-works; custom-engineered packages typically 30–45 days. Every unit dispatched to the UK undergoes a full factory acceptance test with a test report included.

Fiyat Teklifi Alın

“We were sceptical about ordering a kompresör from overseas, but Ever Power’s documentation, commissioning support, and responsiveness to technical questions were genuinely impressive. The CM55PVF has been running continuously for 14 months without a single fault. Our energy monitoring system shows it’s drawing about 22% less power than our old unit in equivalent conditions.”

“Noise was a major concern for us — our compressor room shares a wall with an open-plan office. The CM55PVF runs so quietly that our staff sometimes ask if it’s even on. The smart controller is intuitive and the remote monitoring integration with our BMS took less than a morning to set up. Would recommend without hesitation.”

“We operate three sites across Scotland and have now standardised on the CM55PVF across all locations. The pricing is competitive versus European brands, build quality is solid — we’ve had one of these units in our Dundee site for over two years now — and Ever Power’s custom skid option meant we could get a turnkey package without coordinating three separate contractors.”