{"id":573,"date":"2026-03-31T03:45:02","date_gmt":"2026-03-31T03:45:02","guid":{"rendered":"https:\/\/air-compressor-for-laser-cutter.com\/?post_type=product&p=573"},"modified":"2026-03-31T05:09:41","modified_gmt":"2026-03-31T05:09:41","slug":"cm30pvf-permanent-magnet-variable-frequency-screw-air-compressor","status":"publish","type":"product","link":"https:\/\/air-compressor-for-laser-cutter.com\/da\/vare\/cm30pvf-permanent-magnet-variable-frequency-screw-air-compressor\/","title":{"rendered":"CM30PVF permanent magnetisk variabel frekvens skrueluftkompressor"},"content":{"rendered":"
\n
\n
<\/div>\n
<\/div>\n
\n

Ever Power Industrial \u00b7 Premium Air Compression<\/p>\n

CM30PVF Permanent Magnet
Variable Frequency Screw
Luftkompressor<\/h2>\n

30 kW \u00b7 40 HP \u00b7 IE4 Motor Class \u00b7 Engineered for UK Industrial Operations<\/p>\n

\u2713 CE Marked<\/span>
\n\u2713 ISO 9001:2015<\/span>
\n\u2713 Up to 45% Energy Saving<\/span>
\n\u2713 UK Delivery Ready<\/span><\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

\"EnkeltskruekompressionsteknologiWhen compressed air demand fluctuates \u2014 which it almost always does on a real production floor \u2014 a fixed-speed compressor spends a significant portion of its operating life running off-load, burning electricity while delivering nothing. The CM30PVF permanent magnet variable frequency screw air compressor was designed around the opposite philosophy. Rated at 30 kW (40 HP), it integrates a rare-earth permanent magnet synchronous motor with an intelligent variable frequency drive controller, together forming a system that continuously matches output to actual demand. The result is not only a dramatic reduction in energy consumption \u2014 up to 45% less than equivalent fixed-speed machines \u2014 but also quieter operation at just 66 dB(A), tighter pressure control, and significantly less mechanical wear over the unit’s lifetime. For UK manufacturing businesses facing rising energy costs and tightening environmental commitments, the CM30PVF represents a technically sound and commercially sensible choice.<\/p>\n<\/div>\n

<\/p>\n

\n

\"40<\/p>\n

CM30PVF \u2014 Three pressure configurations, one airend platform. Factory performance-tested before despatch.<\/p>\n

\u2709 Get a Free Quote
\n<\/a><\/p>\n

Reply within 24 hours \u00b7 UK pricing & lead times available \u00b7 Custom specs welcome<\/p>\n<\/div>\n

<\/p>\n

\n
\n
\n
45%<\/div>\n
MAX ENERGY SAVING<\/div>\n<\/div>\n
\n
66 dB<\/div>\n
FULL-LOAD NOISE<\/div>\n<\/div>\n
\n
30 kW<\/div>\n
RATED POWER<\/div>\n<\/div>\n
\n
IE4<\/div>\n
MOTOR EFFICIENCY<\/div>\n<\/div>\n
\n
<3 ppm<\/div>\n
OIL CARRYOVER<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Why UK Manufacturers Choose the CM30PVF<\/h2>\n

Six clear operational advantages that translate directly to lower costs and higher productivity<\/p>\n

\n
\n
\u26a1<\/div>\n

Up to 45% Lower Energy Bills<\/h3>\n

The IE4-class permanent magnet motor has no rotor copper losses, which already puts it ahead of a conventional induction motor. Add a vector-controlled VFD that tracks actual air demand in real time, and you eliminate the single largest waste in a fixed-speed compressor: running off-load at full power. UK facilities with two-shift patterns or variable tool utilisation routinely achieve annual electricity savings of \u00a38,000\u2013\u00a314,000 per unit at current tariff rates.<\/p>\n<\/div>\n

\n
\ud83d\udd07<\/div>\n

Genuinely Quiet at 66 dB(A)<\/h3>\n

At full load, the CM30PVF registers just 66 dB(A) \u2014 quieter than a typical office environment. During partial-load operation, when the VFD reduces motor speed, it is quieter still. This opens up installation options that simply are not practical with louder machines: mezzanines adjacent to production, corners of fabrication shops, or plant rooms near open-plan offices. Across English and Scottish manufacturing sites, this level of acoustic performance is increasingly a site-safety and planning requirement.<\/p>\n<\/div>\n

\n
\ud83c\udfaf<\/div>\n

Rock-Solid Pressure Stability<\/h3>\n

A PID pressure control loop keeps outlet pressure within \u00b10.1 bar of the set point across the full flow range. Load\/unload compressors characteristically allow pressure to swing across a wide band \u2014 often 1.5 to 2 bar between switch-on and switch-off \u2014 creating pressure spikes that cause rejects on sensitive processes such as laser cutting assist gas delivery, pneumatic label application, and precision spray painting. The CM30PVF eliminates this variability entirely, improving process consistency throughout your production run.<\/p>\n<\/div>\n

\n
\ud83d\udee1\ufe0f<\/div>\n

Extended Mechanical Service Life<\/h3>\n

Variable speed operation means the airend and motor turn more slowly during periods of reduced demand. Lower rotational speed directly translates to less heat generation, less bearing fatigue, and slower oil degradation. The practical consequence is that service intervals are longer and component wear rates are lower than on fixed-speed machines running at constant high speed regardless of demand. Over a typical 10-year operational lifespan, this difference in maintenance cost and unplanned downtime is substantial for any UK production facility running compressed air as a core utility.<\/p>\n<\/div>\n

\n
\ud83d\udda5\ufe0f<\/div>\n

Smart Colour Touchscreen Controller<\/h3>\n

The colour LCD controller displays outlet pressure, discharge temperature, operating hours, fault history and real-time energy consumption on a single screen. Configurable pressure setpoints, automatic start\/stop scheduling, and Modbus RTU communication (RS485) are all accessible without specialist tools. Optional integration with your existing SCADA or building management system enables centralised monitoring across multiple compressors or multiple sites \u2014 a feature increasingly requested by UK multi-site manufacturing groups managing their compressed air infrastructure centrally.<\/p>\n<\/div>\n

\n
\ud83c\udf3f<\/div>\n

Measurable Carbon Reduction<\/h3>\n

UK businesses operating under net-zero commitments, CRC Energy Efficiency Scheme obligations, or voluntary Scope 2 reporting frameworks need auditable evidence of energy reductions. The CM30PVF’s built-in energy metering logs cumulative kWh consumption, providing the data needed for carbon accounting without additional metering infrastructure. Switching from an older fixed-speed 30 kW machine running at 75% load factor can reduce annual Scope 2 emissions by a figure in the region of 18\u201330 tonnes CO2e, depending on your UK grid carbon intensity factor.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Technical Specifications<\/h2>\n

All FAD values measured to ISO 1217 Annex C. Noise measured at 1 m distance in free field.<\/p>\n

\n\n\n\n\n\n\n\n
Model<\/th>\nTryk (MPa)<\/th>\nTryk (psi)<\/th>\nFAD (m\u00b3\/min)<\/th>\nFAD (cfm)<\/th>\nPower (kW\/HP)<\/th>\nSt\u00f8j dB(A)<\/th>\nWeight (kg)<\/th>\nL \u00d7 W \u00d7 H (mm)<\/th>\n<\/tr>\n<\/thead>\n
CM30PVF<\/td>\n0.8<\/td>\n116<\/td>\n2.00 \u2013 5.00<\/td>\n71 \u2013 177<\/td>\n30 \/ 40<\/td>\n66<\/td>\n1150<\/td>\n1950 \u00d7 1050 \u00d7 1780<\/td>\n<\/tr>\n
CM30PVF<\/td>\n1.0<\/td>\n145<\/td>\n1.68 \u2013 4.20<\/td>\n59 \u2013 148<\/td>\n1080<\/td>\n1900 \u00d7 1050 \u00d7 1430<\/td>\n<\/tr>\n
CM30PVF<\/td>\n1.25<\/td>\n181<\/td>\n1.52 \u2013 3.18<\/td>\n54 \u2013 112<\/td>\n1080<\/td>\n1900 \u00d7 1050 \u00d7 1430<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Additional Technical Data \u2014 CM30PVF<\/th>\n<\/tr>\n<\/thead>\n
Motortype<\/td>\nPermanent Magnet Synchronous (IE4 Efficiency Class)<\/td>\n<\/tr>\n
K\u00f8re<\/td>\nVariable Frequency Drive (VFD) \u2014 direct-drive, no belt<\/td>\n<\/tr>\n
Cooling<\/td>\nAir-cooled<\/td>\n<\/tr>\n
Supply Voltage<\/td>\n380 \u2013 415 V \/ 50 Hz, 3-phase (UK compatible)<\/td>\n<\/tr>\n
Lubrication<\/td>\nOil-injected screw; residual oil content < 3 ppm<\/td>\n<\/tr>\n
Controller<\/td>\nColour touchscreen; Modbus RTU (RS485) optional<\/td>\n<\/tr>\n
Certificering<\/td>\nCE, ISO 9001:2015; factory performance test certificate standard<\/td>\n<\/tr>\n
Warranty<\/td>\n2 years standard; extended warranty packages available<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Technology, Materials & Working Principle<\/h2>\n

Understanding what makes the CM30PVF different at a component level<\/p>\n

\n
\n

\u2460 Permanent Magnet Motor Core<\/h3>\n

The PM synchronous motor replaces the conventional induction motor used in standard screw compressors. Its rotor carries high-grade NdFeB rare-earth magnets set in a precision silicon-steel lamination stack. Because there is no induced current in the rotor \u2014 unlike an induction motor \u2014 there are no rotor copper losses, and motor efficiency stays above 96% across a wide speed range rather than declining sharply at partial load. In practical terms, this means the compressor remains highly efficient even when running at 40\u201360% of maximum speed, which is exactly where variable demand applications spend most of their operating time. The motor and airend share a common shaft in a direct-drive arrangement, eliminating belt slippage and the efficiency loss associated with belt drive systems.<\/p>\n<\/div>\n

\n

\u2461 Precision Twin-Screw Airend<\/h3>\n

Compression is performed by a matched pair of helical screw rotors \u2014 one male-lobed, one female-lobed \u2014 machined from high-strength alloy steel with surface case-hardening and precision profile grinding. Oil is injected directly into the compression chamber to lubricate the rotor contact faces, seal the clearance between rotors, and cool the compressed air charge during compression. The oil-laden compressed air then passes through a two-stage cyclonic separation system: the primary cyclone removes the bulk of the oil by centrifugal action, while the secondary coalescing oil separator element achieves the final carryover figure of less than 3 parts per million by weight. This level of residual oil meets the requirements of ISO 8573-1 Class 4 for oil aerosols, making the CM30PVF suitable for general industrial pneumatic applications throughout the UK without additional downstream filtration in most cases.<\/p>\n<\/div>\n

\n

\u2462 Vector-Controlled VFD System<\/h3>\n

The variable frequency drive operates using vector (field-oriented) control, which maintains precise torque and speed response even at low frequencies. A pressure transducer on the outlet manifold continuously feeds system pressure data to the controller’s PID algorithm, which adjusts the motor speed \u2014 typically between 25 Hz and 60 Hz \u2014 to hold pressure at the set point. When demand falls to zero, the system enters sleep mode, reducing speed to minimum before stopping cleanly with no inrush current. On restart, the soft-start capability eliminates the large current surge associated with direct-on-line motor starting, protecting the facility’s electrical supply infrastructure and switchgear from repeated stress. This soft-start functionality is particularly valued on older UK industrial sites where electrical supply capacity is constrained.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Where the CM30PVF Is Specified Across the UK<\/h2>\n

\"LuftfilterThe combination of precise pressure regulation, low noise, and measurable energy efficiency makes the CM30PVF a natural fit for facilities where compressed air is not just a utility but a direct input to product quality. From laser cutting workshops in the West Midlands to packaging lines in Yorkshire and pharmaceutical facilities in the South East, the unit handles diverse demands with consistent results. The three available pressure settings \u2014 0.8, 1.0, and 1.25 MPa \u2014 cover the majority of UK general industrial applications within a single platform, allowing sites with mixed pneumatic tool and process requirements to select the optimum configuration rather than accepting an oversized pressure rating as a compromise.<\/p>\n

\n
\n
\ud83d\udd06<\/div>\n

Laser Cutting<\/p>\n<\/div>\n

\n
\ud83d\ude97<\/div>\n

Automotive<\/p>\n<\/div>\n

\n
\ud83e\udd64<\/div>\n

Food & Beverage<\/p>\n<\/div>\n

\n
\ud83d\udc8a<\/div>\n

Pharmaceutical<\/p>\n<\/div>\n

\n
\ud83c\udfd7\ufe0f<\/div>\n

Metal Fabrication<\/p>\n<\/div>\n

\n
\ud83d\udce6<\/div>\n

Packaging Lines<\/p>\n<\/div>\n

\n
\ud83d\udda8\ufe0f<\/div>\n

Commercial Printing<\/p>\n<\/div>\n

\n
\u2708\ufe0f<\/div>\n

Aerospace MRO<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Customer Success Story<\/h2>\n

West Midlands aerospace machining group \u2014 two-year operating review<\/p>\n

\n

A West Midlands precision engineering company \u2014 a Tier 1 supplier of CNC-machined structural components to two UK aerospace OEMs \u2014 replaced three ageing 30 kW fixed-speed compressors across their two sites in early 2023. The engineering team specified the CM30PVF on the basis of the pressure stability requirement: their existing compressors were producing a 1.8 bar pressure swing between load and unload, which was causing inconsistent coolant misting on their 5-axis machining centres and triggering reject rates on close-tolerance bores.<\/p>\n

After 24 months of operation, the maintenance manager reported the following measured outcomes: electricity consumption for compressed air generation fell by 41% across both sites \u2014 an annual saving of approximately \u00a317,400 at their contracted tariff. The coolant misting issue was resolved immediately on commissioning, with a corresponding 60% reduction in tool-diameter-related scrap. Noise in the compressor rooms fell by an estimated 8\u201310 dB, which allowed one of the rooms to be reclassified from mandatory hearing protection zone to a recommended precaution area under their site noise survey, reducing PPE administration. Across 24 months and over 12,000 operating hours, neither unit required a fault call-out \u2014 compared with an average of four annual breakdowns on the legacy machines. A third CM30PVF unit has since been ordered for the company’s new facility in Coventry, due to open in mid-2025.<\/p>\n

\n
\n
41%<\/div>\n
Energy saved<\/div>\n<\/div>\n
\n
\u00a317,400<\/div>\n
Saved per year<\/div>\n<\/div>\n
\n
0<\/div>\n
Fault call-outs in 24 months<\/div>\n<\/div>\n
\n
60%<\/div>\n
Reduction in pressure-related scrap<\/div>\n<\/div>\n<\/div>\n<\/div>\n

What Our UK Customers Say<\/h3>\n
\n
\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n

“Fourteen months running, two shifts a day, zero unplanned stoppages. For a Tier 1 aerospace supplier that kind of reliability is the only metric that really matters. The energy saving is the bonus \u2014 though at current electricity prices, it is a very significant bonus.”<\/p>\n

David R., Maintenance Engineer
\nPrecision CNC Engineering, West Midlands, UK<\/span><\/p>\n<\/div>\n

\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n

“Laser cutting needs constant pressure \u2014 the old load\/unload compressor was causing edge-quality variations on thin stainless that we were having to hand-finish. Switched to the CM30PVF at 1.0 MPa and the problem simply went away. Ever Power’s team were helpful through the whole specification process.”<\/p>\n

Sarah M., Operations Director
\nSheet Metal & Laser Fabrication, Sheffield, UK<\/span><\/p>\n<\/div>\n

\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n

“We run a dusty bottling environment and Ever Power configured a heavy-duty inlet filter package to suit. The pressure spikes that were causing label application rejects are completely gone. The whole procurement and commissioning experience was straightforward and the documentation provided was comprehensive.”<\/p>\n

James T., Engineering Manager
\nBeverage Packaging, Yorkshire, UK<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Ever Power Manufacturing & Custom Configuration<\/h2>\n

We build what standard catalogue pages cannot offer<\/p>\n

Ever Power operates a vertically integrated manufacturing facility with in-house CNC machining centres, automated assembly lines, and a dedicated compressed air test cell where every unit is run at rated working pressure before despatch. A factory performance test certificate, showing measured FAD and specific energy consumption, accompanies every CM30PVF as standard \u2014 not as an option. Our application engineering team has extensive experience working directly with UK industrial customers to specify and build modified versions that standard brochures do not cover.<\/p>\n

Custom configurations we regularly supply include: 400 V \/ 50 Hz three-phase wiring and UK-compatible terminal blocks; IP65 electrical enclosures for washdown and humid environments; stainless steel oil separator vessels for food-contact and pharmaceutical facility installations; extended sump capacity for remote or unmanned sites requiring infrequent oil changes; tropical cooling packages for high-ambient machine rooms; custom inlet filter assemblies for high-dust or high-humidity environments; and bespoke control panel wiring for integration with customer-specified SCADA systems. There is no minimum order quantity for custom configurations, and our application engineers are available to discuss requirements in detail before you commit to an order.<\/p>\n

\n
\n

\ud83c\udfed Vertically Integrated<\/p>\n

Airend machining to final assembly under one roof, enabling tight quality control at every stage<\/p>\n<\/div>\n

\n

\ud83d\udee0\ufe0f Full Custom Builds<\/p>\n

Voltage, enclosure rating, filtration, separator material, and control integration \u2014 all configurable<\/p>\n<\/div>\n

\n

\ud83d\udccb Test Cert Included<\/p>\n

Measured FAD and specific power data supplied with every unit as part of standard documentation<\/p>\n<\/div>\n

\n

\ud83d\udea2 UK Port Delivery<\/p>\n

Sea freight to Felixstowe, Southampton, or Tilbury; airfreight available for time-critical orders<\/p>\n<\/div>\n<\/div>\n

\u2709 Request a Custom Quote
\n<\/a><\/p>\n

sales@air-compressor-for-laser-cutter.com \u00b7 Response within 24 hours<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Ofte stillede sp\u00f8rgsm\u00e5l<\/h2>\n

Real questions from UK industrial buyers \u2014 answered directly<\/p>\n

\n
\n

What is the typical price of a 30 kW permanent magnet variable frequency screw luftkompressor<\/a> for a UK manufacturing facility, and how does the cost compare with a standard fixed-speed model?<\/h3>\n<\/div>\n
\n

The CM30PVF carries a modest price premium over an equivalent fixed-speed machine \u2014 typically in the range of 20\u201335% depending on configuration. For most UK facilities running two or more shifts, this additional capital cost is recouped in 12\u201324 months purely from energy savings, after which the reduced running cost represents a direct improvement to operating margins. For an accurate, UK-delivered price based on your required pressure setting and any custom options, contact us at sales@luftkompressor-til-lasersk\u00e6rer.com<\/a>.<\/p>\n<\/div>\n<\/div>\n

\n
\n

How much energy can a UK factory realistically save per year by switching from a fixed-speed to a 30 kW variable frequency screw air compressor at current electricity tariff rates?<\/h3>\n<\/div>\n
\n

For a two-shift UK facility with moderately variable compressed air demand, switching from a fixed-speed 30 kW machine to a CM30PVF typically reduces electricity consumption for compressed air generation by 30\u201345%. At mid-2024 UK industrial electricity tariffs of approximately 22\u201328 p\/kWh, this translates to annual savings of \u00a38,000\u2013\u00a314,500 per unit. Sites with highly variable demand \u2014 such as automotive body shops or fabrication facilities with intermittent tool use \u2014 tend to see savings at the upper end of this range.<\/p>\n<\/div>\n<\/div>\n

\n
\n

Which working pressure setting should I choose for a laser cutting application in the UK \u2014 0.8 MPa, 1.0 MPa, or 1.25 MPa \u2014 and what are the practical differences in flow output?<\/h3>\n<\/div>\n
\n

For dedicated fibre laser cutting using compressed air as the assist gas \u2014 as is common on mild steel and aluminium up to around 12 mm \u2014 the 1.0 MPa (145 psi) variant is the most commonly specified option as it provides the necessary nozzle exit velocity without over-pressurising the assist gas train. If the same compressor also supplies pneumatic clamping, rotary actuators, or blow-off circuits simultaneously, the 1.25 MPa variant provides headroom that avoids pressure sag during simultaneous demands. The 0.8 MPa option is best suited to applications where pressure requirements are genuinely modest \u2014 general workshop tools, pneumatic conveyors, or light automation \u2014 and maximising flow volume per kilowatt is the priority.<\/p>\n<\/div>\n<\/div>\n

\n
\n

Where can I find a reliable supplier of 30 kW permanent magnet screw air compressors who can provide UK delivery, English-language documentation, and after-sales technical support?<\/h3>\n<\/div>\n
\n

Ever Power supplies the CM30PVF directly to UK industrial customers, with sea freight delivery to Felixstowe, Southampton, Tilbury, and other UK ports, as well as airfreight for time-critical orders. All documentation \u2014 operation and maintenance manual, CE declaration of conformity, factory test certificate, and spare parts list \u2014 is supplied in English as standard. Our application engineering team is available by email for pre-purchase technical consultation, installation planning, and commissioning guidance. Reach us at sales@luftkompressor-til-lasersk\u00e6rer.com<\/a>.<\/p>\n<\/div>\n<\/div>\n

\n
\n

How often does a 30 kW PM VFD screw air compressor require servicing and what are the typical ongoing maintenance costs for a UK operator running two shifts per day?<\/h3>\n<\/div>\n
\n

The CM30PVF follows a standard oil-injected screw compressor service schedule: air filter and oil filter replacement at approximately 2,000 operating hours; oil change at 4,000 hours; oil separator element at 8,000 hours. A two-shift site running approximately 4,000 hours per year would typically carry out one full service per year. Because variable speed operation reduces average rotor speed and oil temperature during partial-load periods, oil degradation is slower than on a fixed-speed machine, and the 8,000-hour separator element interval is achievable in practice. We supply a UK-compatible consumable spares kit, and all service procedures are documented in the English-language maintenance manual supplied with each unit.<\/p>\n<\/div>\n<\/div>\n

\n
\n

Can Ever Power supply the CM30PVF with a 400V\/50Hz UK electrical specification, CE certificate, and UKCA marking for a UK site operating under the Pressure Equipment (Safety) Regulations?<\/h3>\n<\/div>\n
\n

All CM30PVF units supplied for the UK market are wired at 380\u2013415 V \/ 50 Hz three-phase as standard, which is fully compatible with UK industrial supplies. CE declaration of conformity under the Machinery Directive is included with every unit. For customers requiring UKCA marking, IEC wiring standards, IP65 electrical enclosures, or integration with UK-specified safety systems, our factory engineering team can accommodate these requirements during the manufacturing process. Please discuss your specific regulatory or site requirements with us before placing an order so we can confirm the appropriate configuration.<\/p>\n<\/div>\n<\/div>\n

\n
\n

What is the typical delivery lead time when ordering a CM30PVF screw air compressor from Ever Power for delivery to a UK industrial site, and is express airfreight available?<\/h3>\n<\/div>\n
\n

Standard production and sea freight transit lead time to UK ports is typically 6\u20139 weeks from order confirmation, depending on factory schedule at the time of order. For standard configurations (no modifications), stock availability can reduce this significantly \u2014 contact us for current lead times. Airfreight delivery to UK airports including Heathrow, Manchester, or East Midlands is available for urgent requirements and typically reduces transit to 10\u201314 days from factory despatch. Customs documentation for UK import \u2014 including commercial invoice, packing list, and certificate of origin \u2014 is prepared as standard to facilitate smooth customs clearance.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Klar til at reducere dine energiomkostninger til trykluft?<\/h2>\n

Speak with an Ever Power application engineer about the CM30PVF for your UK facility \u2014 or request a detailed specification and UK-delivered price today.<\/p>\n

\u2709 Get a Quote Today
\n<\/a><\/p>\n

sales@luftkompressor-til-lasersk\u00e6rer.com<\/p>\n

redigeret af gzl<\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

Ever Power Industrial \u00b7 Premium Air Compression CM30PVF Permanent MagnetVariable Frequency ScrewAir Compressor 30 kW \u00b7 40 HP \u00b7 IE4 Motor Class \u00b7 Engineered for UK Industrial Operations \u2713 CE Marked \u2713 ISO 9001:2015 \u2713 Up to 45% Energy Saving \u2713 UK Delivery Ready When compressed air demand fluctuates \u2014 which it almost always does […]<\/p>","protected":false},"featured_media":568,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[21],"product_tag":[],"class_list":{"0":"post-573","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-air-compressor","8":"first","9":"instock","10":"shipping-taxable","11":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/air-compressor-for-laser-cutter.com\/da\/wp-json\/wp\/v2\/product\/573","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/air-compressor-for-laser-cutter.com\/da\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/air-compressor-for-laser-cutter.com\/da\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/air-compressor-for-laser-cutter.com\/da\/wp-json\/wp\/v2\/media\/568"}],"wp:attachment":[{"href":"https:\/\/air-compressor-for-laser-cutter.com\/da\/wp-json\/wp\/v2\/media?parent=573"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/air-compressor-for-laser-cutter.com\/da\/wp-json\/wp\/v2\/product_brand?post=573"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/air-compressor-for-laser-cutter.com\/da\/wp-json\/wp\/v2\/product_cat?post=573"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/air-compressor-for-laser-cutter.com\/da\/wp-json\/wp\/v2\/product_tag?post=573"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}